Related posts:

1. 383ci SBC Build, part II Building a Bullet Proof Rotating Assembly 383ci SBC Build, Part II By Ryan Manson * clampdowncomp@gmail.com With the foundation of our 383ci Chevy build in place thanks to the installation of the forged Eagle 3 ¾-inch stroked crankshaft, it’s time to move onto the rotating assembly. That means it’s time...
2. 383 SBC Build, Part III Installing the top end of our 383 blower build 383ci SBC Build, Part III By Ryan Manson * clampdowncomp@gmail.com With the short block assembled for our 383 supercharged project motor, it’s time to shift our attention once again; this time to the heads and valve train. Like the rotating assembly,...
3. 383 SBC Build, Part V Blowing the Build 383 SBC Build, Part V: A Prototype Never Produced- Chevrolet’s “Super-Fire V8” By Ryan Manson * clampdowncomp@gmail.com Here’s the valve-in-head V8 as only the leader can build it and here are some wonderful things it brings you: 578 horsepower and 620 lb-ft. torque made possible by the...
4. How to select the proper pistons for a vintage engine How to measure and select the right pistons Proper Piston Specs for a Vintage Engine Choosing the proper pistons for a custom engine build can be a daunting task for the first timer and something many of us would simply prefer to leave up to an experienced engine builder. But...
5. Roadster Rhinoplasty, Part II Roadster Rhinoplasty, Part II The track nose for the Project Potvin roadster is starting to take shape By Ryan Manson * clampdowncomp@gmail.com Our last story laid the foundation for the front end of the Project Potvin Roadster in the form of building a buck in which to shape the track...
6. 383 SBC Build, Part IV Dressing up a modern engine with vintage amenities 383 SBC Build, Part IV By Ryan Manson * clampdowncomp@gmail.com It’s pretty exciting when your engine project starts coming together and you’ve finally got an assembled long block on your engine stand. For me, it’s usually the culmination of months of planning...